BWQRK - ZAP LOCK MEDIUM

  • MSDS: BWQRK
  • Manufacturer: PACE TECHNOLOGY
  • Product Name: ZAP LOCK MEDIUM
  • National Stock Number: 8030-00N057455
Product Identification

Product ID:ZAP LOCK MEDIUM
MSDS Date:11/07/1989
FSC:8030
NIIN:00N057455
MSDS Number: BWQRK

Responsible Party
PACE TECHNOLOGY
9420 SANTA ANITA AVE
RANCHO CUCAMONGA, CA 91730
US

Emergency Phone: 714-987-0550

Info Phone: 714-987-0550

Cage: IO984

Contractor
PACER TECHNOLOGY
RANCHO CUCAMONGA, CA 91730 US

Telephone: 909-987-0550

Cage: 62530

Ingredients

2-PROPENOIC ACID, 2-CYANO-, ETHYLESTER;

CAS: 7085-85-0

RTECS: UD3330000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50: 12.2 CC/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATES EYES, MUCOUS
MEMBRANES. CHRONIC: NO RESIDUAL EFFECTS OF ACUTE PROPERTIES.
CONTAINS PMMA #9011-14-7-IMPLANTATION UNDER SKIN OF EXPERIMENTAL
ANIMALS CAUSED TUMORS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:TEARING FROM EYE IRRITATION AND MUCOUS
MEMBRANES WITH SOME COUGHING.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: FLUSH AREAS OF CONTACT
WITH WATER. WIPE AWAY LIQUID ADHESIVE WHERE POSSIBLE WITH RESIDUALS
BEING REJECTED BY SOAKING IN WATER. EYES: FLUSH WITH WATER FOR AT
LEAS T 15 MINUTES . INGESTION: CALL MDIMMEDIATELY .

Fire Fighting

Flash Point Method:TCC
Flash Point:176F,80C
Extinguishing Media:FLUSH WITH LARGE AMOUNTS OF WATER OR DRY CHEMICAL
EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. FUMES MAY BE IRRIT IF NOT BURNING & REQ AIR SUPP SYS W/GOGG WHILE
APPLYING LRG AMTS OF WATER/DRY (SUPDAT)
Unusual Fire/Explosion Hazard:NONE. COMBUSTIBLE REQUIRING ABOVE
PROCEDURES.

Accidental Release

Spill Release Procedures:ABSORB WITH PAPER TOWELS OR CLOTH. SWEEP INTO
TRAY FOR LIQUID TO BE REACTED WITH WATER FOR SOLID WASTE TREATMENT.
AVOID OVER-EXPOSURE TO FUMES WITH LARGE SPILLS AND POOR
VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID MOISTURE, DIRECT UV-SUNLIGHT AND
DO NOT STORE ABOVE 25C. KEEP CONTAINERS CLOSED TIGHTLY WHEN NOT IN
USE. IDEAL STORATE IS AT 5-10C.
Other Precautions:AVOID BREATHING VAPOR, CONTACT WITH EYES AND SKIN. DO
NOT STORE AT -5C WHICH FREEZES PRODUCT TO USELESS STATE. PRODUCT
NOT DAMAGED BY FREEZING.

Exposure Controls

Respiratory Protection:NORMALLY NOT NECESSARY. A NIOSH/MSHA APPROVED
ORGANIC VAPOR CANISTER MAY BE USED.
Ventilation:LOCAL EXHAUST TO ELIMINATE EYE IRRITATION. MECHANICAL
(GENERAL) FOR LARGE QUANTITIES USED TO 2 PPM.
Protective Gloves:VINYL (POLYETHYLENE) NON-STICKING.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NORMALLY NOT USED, HOWEVER, APRON PROTECTS
CLOTHING FROM HARDENED GLUE.
Work Hygienic Practices:SOAP AND WATER HELPS REMOVE ADHESIVE FROM SKIN.
Supplemental Safety and Health
FIRE FIGHT PROCEDURES: CHEMICAL EXTINGUISHER.

Chemical Properties

Boiling Pt:B.P. Text:149F,65C
Vapor Pres:1 @ 20C
Vapor Density:NIL
Spec Gravity:1.05 (H*2O=1)
Evaporation Rate & Reference:NIL (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT WATER-WHITE TO STRAW COLORED LIQUID
WITH STIMULATIVE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER, ALCOHOL, AMINES, ALKALINE MATERIALS AND DIRECT
UV.
Stability Condition to Avoid:EXCESSIVE HEAT ABOVE 176F, MOISTURE AND
ALKALINES. STABLE UP TO 122F. STORE IN COOL, DRY PLACE.
Hazardous Decomposition Products:TYPICAL COMBUSTIBLE BY-PRODUCTS OF
CARBON MONOXIDE AND DIOXIDE.
Conditions to Avoid Polymerization:STORE IN COOL PLACE FOR BEST
PROPERTIES AND SHELF LIFE.

Disposal

Waste Disposal Methods:INCINERATE SOLID COMBUSTIBLE WASTE OR DUMP AS
CHEMICAL WASTE ACCORDING TO LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.